2014 Jeep Wrangler Drive Axle Shaft Parts


Showing 1 - 10 of 61 products
Image
SKU
Product
Rating
Price

Spicer
  • AXLE SHAFT DANA 44 JK NON RUBICON
  • with 226mm Axle with Axle Shaft Assembly with Axle Bearing and Seal
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Location: Lh/rh
    • Axle Cover Bolt Hole Qty: 10
    • Quantity: 1
    • Axle Length (In): 31.890
    • Axle Model: Dana S44
    • Outer Axle Included: Y
    • Wheel Stud Hole Diameter (In): 0.645
    • Wheel Bearing Included: Y
    • Wheel Nuts Included: N
    • Bolt Pattern: 5 X 5.00
    • ABS Tone Ring Included: Yes
    • Number Of Wheel Lugs: 5
    • Bearing Pilot Diameter (In): 1.563
    • Wheel Studs Included: Y
    • Axle Shaft Included: Y
    • Spline Count: 30 Inboard
    • Axle Spline Count: 30 Inboard
    • Cover Bolt Quantity: 10
    • Bearing Included: Y
    • Axle Type: Complete Assembly
    • Retainer Ring Included: Y
    • Axle Length (Mm): 810.006
    • Brake Pilot Diameter (In): 2.833
    • ABS/Non-ABS: Abs
    • ABS Sensor Ring Installed: Y
    • Seal Kit Included: N
    • Full-Floating Or Semi-Floating: Semi-floating
    • Includes Tone: Y
    • Seal Included: Y
    • Inner Axle Included: Y
    • U-Joint Included: N
    • Wheel Bolt Prep Kit Included: N
  • Features:
    • Application-specific design and engineering
    • Precision manufacturing processes
    • Quality materials
    • Statistically controlled testing and heat treatment.
  • The upgrades made to these Dana 30 and Dana 44 axle shafts deliver optimal performance with larger tires and off-road use. They also offer a wide range of advantages for Jeep drivers everywhere.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
48003272AA, 630-338

Additional Fitment Information:
Vehicle Position
2014 - Jeep Wrangler Rear

Spicer
  • AXLE SHAFT DANA 44 JK NON RUBICON
  • with 226mm Axle with Axle Shaft Assembly with Axle Bearing and Seal
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Location: Lh/rh
    • Axle Cover Bolt Hole Qty: 10
    • Quantity: 1
    • Axle Length (In): 31.890
    • Axle Model: Dana S44
    • Outer Axle Included: Y
    • Wheel Stud Hole Diameter (In): 0.645
    • Wheel Bearing Included: Y
    • Wheel Nuts Included: N
    • Bolt Pattern: 5 X 5.00
    • ABS Tone Ring Included: Yes
    • Number Of Wheel Lugs: 5
    • Bearing Pilot Diameter (In): 1.563
    • Wheel Studs Included: Y
    • Axle Shaft Included: Y
    • Spline Count: 30 Inboard
    • Axle Spline Count: 30 Inboard
    • Cover Bolt Quantity: 10
    • Bearing Included: Y
    • Axle Type: Complete Assembly
    • Retainer Ring Included: Y
    • Axle Length (Mm): 810.006
    • Brake Pilot Diameter (In): 2.833
    • ABS/Non-ABS: Abs
    • ABS Sensor Ring Installed: Y
    • Seal Kit Included: N
    • Full-Floating Or Semi-Floating: Semi-floating
    • Includes Tone: Y
    • Seal Included: Y
    • Inner Axle Included: Y
    • U-Joint Included: N
    • Wheel Bolt Prep Kit Included: N
  • Features:
    • Application-specific design and engineering
    • Precision manufacturing processes
    • Quality materials
    • Statistically controlled testing and heat treatment.
  • The upgrades made to these Dana 30 and Dana 44 axle shafts deliver optimal performance with larger tires and off-road use. They also offer a wide range of advantages for Jeep drivers everywhere.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position
2014 - Jeep Wrangler Rear

Crown Automotive
  • For Use w/Dana 30
  • Axle Shaft; For Use w/Dana 30;
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 30
    • WARNING CA Proposition 65: No
  • Features:
    • Axle Shaft
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Position Sub Model
2014 - Jeep Wrangler Front Left Unlimited Sport

Crown Automotive
  • For Use w/Dana 30
  • Axle Shaft; For Use w/Dana 30;
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 30
    • WARNING CA Proposition 65: No
  • Features:
    • Axle Shaft
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Position Sub Model
2014 - Jeep Wrangler Front Right Unlimited Sport

Crown Automotive
  • Includes Retainer/Bearing/Seal And Ring; w/Standard And Trac-Lok Differential; For Use w/Dana 44
  • Axle Shaft; Includes Retainer/Bearing/Seal And Ring; w/Standard And Trac-Lok Differential; For Use w/Dana 44;
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 44
    • WARNING CA Proposition 65: No
  • Features:
    • Axle Shaft
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position Sub Model
2014 - Jeep Wrangler Rear Unlimited Sport

Yukon Gear
  • Yukon Chromoly Rear Axle Kit; Dana 44; Jeep JK Rubicon; RH; 32 Spline; 32.6in.
  • Dana 44 Rear; 32.6 in. Long Dana 44. JK Rubicon; Right Rear Axle Kit; 32 5/8 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)
  • Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 44
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana 44 Differential
    • For Right-Hand Side
    • Measures 32.6 in
    • 32 Spline
    • 5 X 5.0 in. Bolt Pattern
    • Heavy Duty 4340 Chromoly Construction
    • Includes Axle Bearing And Seal
    • ABS Ring
    • Retainer
    • And Studs
  • Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

Additional Fitment Information:
Vehicle Position Sub Model
2014 - Jeep Wrangler Rear Right Rubicon

Yukon Gear
  • Yukon Chromoly Rear Axle Kit; Dana 44; Jeep JK Rubicon; RH; 32 Spline; 32.6in.
  • Dana 44 Rear; 32.6 in. Long Dana 44. JK Rubicon; Right Rear Axle Kit; 32 5/8 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)~Dana 44; JK Rubicon; 32.6 in. Long
  • Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 44
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana 44 Differential
    • For Right-Hand Side
    • Measures 32.6 in
    • 32 Spline
    • 5 X 5.0 in. Bolt Pattern
    • Heavy Duty 4340 Chromoly Construction
    • Includes Axle Bearing And Seal
    • ABS Ring
    • Retainer
    • And Studs
  • Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

Additional Fitment Information:
Vehicle Position Sub Model
2014 - Jeep Wrangler Rear Right Unlimited Rubicon

Yukon Gear
  • Yukon Chromoly Rear Axle Kit; Dana 44; Jeep JK Non-Rubicon; 30 Spline; 32in. Lon
  • Dana 44; Left Hand Or 30 Spline; 32 in. Long Dana 44; JK Non-Rubicon; 4340 Chromoly Rear Axle Kit; 30 Spline; 32 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)~Dana 44; Non-Rubicon JK; Left Hand Or 30 Spline; 32 in. Long
  • Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 44
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana 44 Differential
    • For Left Or Right Side
    • Measures 32 in. Long
    • 30 Spline
    • 5 X 5.0 in. Bolt Pattern
    • Heavy Duty 4340 Chromoly Construction
    • Includes Axle Shaft
    • Axle Bearing And Seal
    • ABS Ring
    • Retainer
    • And Studs
  • Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

Additional Fitment Information:
Vehicle Position Sub Model
2014 - Jeep Wrangler Rear Unlimited Sport

Yukon Gear
  • Yukon Chromoly Rear Axle Kit; Dana 44; Jeep JK Non-Rubicon; 30 Spline; 32in. Lon
  • Dana 44; Left Hand Or 30 Spline; 32 in. Long Dana 44; JK Non-Rubicon; 4340 Chromoly Rear Axle Kit; 30 Spline; 32 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)
  • Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 44
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana 44 Differential
    • For Left Or Right Side
    • Measures 32 in. Long
    • 30 Spline
    • 5 X 5.0 in. Bolt Pattern
    • Heavy Duty 4340 Chromoly Construction
    • Includes Axle Shaft
    • Axle Bearing And Seal
    • ABS Ring
    • Retainer
    • And Studs
  • Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

Additional Fitment Information:
Vehicle Position Sub Model
2014 - Jeep Wrangler Rear Unlimited Sport

Dorman
  • Rear Axle Chromoly
  • w/Sales Code DSA (Anti Spin Differential Rear Axle) or w/Sales Code DS8 (Conventional Differential Rear Axle)
  • Product Attributes:
    • Axle Type: Solid Shaft Axle
    • CV Joints Included: No
    • Retainer Clips Included: Yes
    • Minimum Length: 31.89 In
    • Package Contents: Axle Shaft; Wheel Studs; Wheel Nuts; Bearing And Seal
    • Inboard Spline Quantity: 30
    • Spline Quantity: 30
    • ABS Tone Ring Installed: Not Included
    • Axle Nut Included: Yes
    • Outboard Spline Quantity: 0
    • Diameter: 1.57 In
    • Hole Quantity: 5
    • Wheel Lug Quantity: 10
  • Features:
    • Direct replacement - this axle shaft replaces the original equipment on specific vehicle years, makes and models
    • Complete kit - each shaft includes critical installation hardware and components needed for specific vehicle applications
    • Durable construction - designed to rigorous standards and tested to ensure performance
    • Trustworthy solution - backed by team of engineers and quality control specialists in the United States
  • Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

This Part Fits the Following OEM/Substitute Numbers:
68003272AA, AXK379

Additional Fitment Information:
Vehicle Position Sub Model
2014 - Jeep Wrangler Rear Left Unlimited Willys Wheeler
Showing 1 - 10 of 61 products

Loading...